Find Your Machine
Four questions, then the published specifications for the class that fits — throughput, dimensions, power and film, and a straight answer when none of ours fits.
Open the selector →
What a Packaging Machine Quote Leaves Out
Services, tooling, consumables, commissioning and support — the line items that arrive after the purchase order, and a 14-point RFQ that surfaces them first.
Read the guide →
Comparing Cup Filling and Sealing Machines
Trepko, Serac and Hefestus — two machine classes sold under one name, and the cups-per-hour convention that quietly distorts every shortlist.
Read the comparison →
Comparing Thermoforming Machines
Multivac, Sealpac and Hefestus — what each publishes, why a cycle is not a pack, and how film quietly sets the limits of your packaging.
Read the comparison →
Comparing Tray Sealing Machines
Proseal, Ilpra and Hefestus, judged on what each actually publishes — and on the one specification almost nobody in the category prints.
Read the comparison →
Specifying a Cheese Packaging Line
Block, portion, sliced and shredded are four different lines wearing the same name — and cheese is a barrier problem before it is a filling one.
Read the guide →
Specifying a Seafood Packaging Line
Cold chain, high moisture and odour carryover make seafood one of the least forgiving categories to automate.
Read the guide →
Specifying a Meat Packaging Line
Purge, gas flush and tray format drive the specification — and thermoforming versus preformed trays shapes everything downstream.
Read the guide →
Specifying a Honey Filling Line
High viscosity, temperature dependence and crystallisation — three properties that break equipment specified on nominal figures.
Read the guide →
Specifying a Dairy Packaging Line
Milk, yogurt and cheese are three different packaging problems sharing one factory. The constraint is usually the transitions between them.
Read the guide →
Specifying a Yogurt Cup Filling Line
Set, Greek, drinkable and plant-based are four products with different densities through the same equipment. Your mix drives the spec, not your volume.
Read the guide →
Specifying a Sauce and Dressing Line
A thin vinaigrette and a thick barbecue sauce are different filling problems, and most condiment producers run both.
Read the guide →
Specifying a Tray Fill and Seal Line
Every tray size, depth and material is a tooling set and a changeover — the cost most often underestimated at specification time.
Read the guide →
Specifying Frozen Dessert Packaging
Ice cream has fragmented into more formats than almost any other chilled category. That fragmentation, not volume, makes the decision hard.
Read the guide →
Choosing a Hummus Filling Line
Viscosity, rim smearing and mid-run oil separation — the four numbers to establish about your own product before you look at a machine.
Read the guide →
Hummus Packaging Lines Market
Market size, share by packaging format, and the split between automatic and semi-automatic lines.
Read the guide →Ready to Transform Your Manufacturing?
Get insights tailored to your production needs and discover your ROI potential
Get in Touch